Boat

Photo of Capercaillie coming soon

The boat

Ta Yang Yacht Building Co. · Kaohsiung, Taiwan · designed by Robert Perry

Capercaillie · Tayana 37

Cutter · long keel with cut-away forefoot · keel-hung rudder

A heavy, canoe-sterned bluewater cutter from the drawing board of Bob Perry. Built strong and semi-custom in Taiwan, she belongs to a design that has already gone round the world several times. Now she’s being refitted for her hardest passage yet: the Golden Globe Race 2030.

Length11.18 m36’8″
Beam3.51 m11’6″
Draft1.73 m5’8″
Displacement10,200 kg22,500 lb
Sail area80 m²861 ft²
Hull speed7.5 kn

The quick read

At a glance

Why she suits the GGR

  • Long keel and heavy displacement: steady and sea-kindly in big seas
  • Cutter rig: easy to reduce sail as the wind builds
  • A 1970s production design, built like a tank
  • Proven offshore, with several circumnavigations on record

Known for

  • Bob Perry’s canoe stern and bowsprit profile
  • Began life as the CT 37 before becoming the Tayana 37 in 1979
  • Semi-custom interiors, so hardly two boats are the same
  • Hollow bulwarks and plenty of teak

On the refit list

  • Wood-cored deck under the teak overlay
  • Chainplates, knees and compression post
  • Original fuel and water tanks
  • Laminated wooden bowsprit
  • Helm balance and mast rake

The story

About the Tayana 37

Robert Perry drew the Tayana 37 in the mid-1970s, at the height of the double-ender craze. Ta Yang in Kaohsiung built her, and the first hulls were sold as the CT 37 until the Tayana name took over in 1979. Roughly 600 were built, and Ta Yang kept building them to order well into the 2000s. That makes her one of the most successful bluewater designs of her era.

Underneath she has a long keel with a cut-away forefoot, a rudder hung on the keel and internal iron ballast. Up top there’s a bowsprit, hollow bulwarks and a cutter rig. Only a handful were built as ketches. For her waterline she is heavy and modestly canvassed. That costs some speed in light air, but she pays it back with a comfortable motion when it blows. Many owners report she can carry weather helm, and from 1984 the mast was moved forward on new boats to help balance her.

Capercaillie is a single-spreader cutter with a deck-stepped mast, internal chainplates, a single backstay and a wooden bowsprit. She sets a main, staysail and yankee. The refit, documented episode by episode, will get her from a solid cruiser to a boat ready for 30,000 miles non-stop round the world, sailed the 1968 way.

The full sheet

Tayana 37 specifications

Dimensions & weights
LOA (length overall)11.18 m36.67 ft
LWL (waterline length)9.45 m31.00 ft
Beam3.51 m11.50 ft
Max draft1.73 m5.67 ft
Displacement10,200 kg22,500 lb
Ballast3,630 kg8,000 lb
Ballast typeIron, internal
Sail area (cutter)80 m²861 ft²

Engine & tanks
Engines fitted over the yearsVolvo, Perkins 4-108, Yanmar
Horsepower30–50 hp
Fuel341 L90 US gal
Water379 L100 US gal
Performance ratios
Sail area / displacement17.3
Ballast / displacement35.6 %
Displacement / length337
Comfort ratio40.8
Capsize screening1.63
Hull speed7.46 kn
PHRF rating174

Design & construction
Hull typeLong keel, cut-away forefoot, keel-hung rudder
RigCutter (a few ketches)
HullSolid hand-laid GRP
DeckWood-cored GRP, usually teak overlay
DesignerRobert Perry
BuilderTa Yang Yacht Building Co., Taiwan
First built1976
Number built≈ 600

What the ratios mean

By the numbers

40.8
Comfort
Ocean-going motion

A slow, easy motion in a big sea. That matters when you’re alone on board for eight months.

1.63
Capsize
Offshore margin

Well under the 2.0 line usually used for offshore boats. Her shape helps her stay upright.

17.3
SA / Disp
Moderate power

Enough sail to keep moving in lighter winds without being a handful when it blows.

337
Disp / Length
Moderate-heavy

Steady and predictable rather than quick, and she carries stores and spares well.

Class specifications and ratios: Keel Index – Tayana 37. Metric values converted and rounded. Capercaillie’s own details will be updated as the refit goes on.